ADAS Calibration
ADAS Calibration in Wichita, KS
Keeping Your Safety Systems Accurate When It Matters Most
Advanced driver assistance systems are only as reliable as their calibration. A camera or sensor that is even slightly out of alignment can send incorrect data to your lane departure warning, automatic emergency braking, blind spot monitoring, or adaptive cruise control, creating a false sense of security when you need those systems most. Affinity Automotive Services in Wichita, KS, performs ADAS calibration using factory-level equipment to restore your safety systems to manufacturer specifications after suspension work, wheel alignment, steering repairs, or any service that affects sensor and camera positioning.
What ADAS Is and WhyCalibration Matters
ADAS stands for Advanced Driver Assistance Systems, a network of cameras, radar sensors, ultrasonic sensors, and lidar that monitor your vehicle’s surroundings and assist with steering, braking, and collision avoidance. These systems are precisely calibrated at the factory to function within specific tolerances.
Any service that changes the position of a camera or sensor, the ride height of the vehicle, or the angle of the windshield can throw that calibration off. Even a new set of tires or a wheel alignment can affect certain systems. When calibration is off, the system may react too late, too early, or not at all, and you may not know it until it matters most.
When Your Vehicle May NeedADAS Recalibration in Wichita
- After windshield replacement
Forward-facing cameras mounted to the windshield must be recalibrated after the glass is replaced.
- After a wheel alignment
Changes to wheel angles affect camera and radar positioning and can require recalibration depending on the vehicle.
- After suspension repairs
Ride height changes from new shocks, struts, or springs affect the angle of sensors and cameras.
- After a minor collision
Even low-speed impacts can shift bumper-mounted radar sensors or grille-mounted cameras out of specification.
- After replacing a camera or sensor
Any replaced ADAS component requires calibration before the system functions correctly.
- After certain software or module updates
Some vehicles require recalibration after electronic control module updates that affect ADAS function.
- When an ADAS warning light appears
A dashboard warning for any driver assistance system is a signal that the system has detected a fault and needs professional attention.
Our ADAS CalibrationServices in Wichita, KS
Static ADAS Calibration
Performed in a controlled environment using targets and factory calibration software to recalibrate cameras and sensors to exact manufacturer specifications without moving the vehicle.
Dynamic ADAS Calibration
Some systems require a drive cycle at specific speeds on certain road types to complete calibration. We perform dynamic calibrations following manufacturer procedures to confirm full system function.
Forward Collision and Lane Departure Calibration
Front-facing cameras and radar systems that support automatic emergency braking, forward collision warning, and lane departure alerts are recalibrated to factory tolerances.
Blind Spot and Rear Cross-Traffic Calibration
Rear and side-mounted sensors that support blind spot monitoring and rear cross-traffic alert systems are recalibrated after any service that affects their position.
ADAS System Fault Testing
When an ADAS warning light appears, we use factory scanners to read system fault codes, identify which sensor or camera is affected, and determine whether calibration, repair, or replacement is needed.
Why Choose Affinity Automotive Services forADAS Calibration in Wichita?
Your safety systems are only worth having if they work correctly. At Affinity Automotive Services, we use factory-level equipment and follow manufacturer procedures so your ADAS calibration is done right, not just completed.
Honest About What Your Vehicle Needs
ADAS calibration can be particular for certain vehicle makes. We tell you upfront what we can handle and guide you in the right direction if your vehicle requires a specialist.
ASE Blue Seal Recognized Shop
Our facility meets the National Institute for Automotive Service Excellence standards, reflecting the training and quality behind every calibration we perform.
Factory-Level Equipment for Domestic and European Vehicles
Factory scanners for Ford, GM, and Chrysler, and Drive Pro for European vehicles, give us the access needed to perform accurate ADAS testing and calibration.
3-Year/36,000-Mile In-House Warranty
Qualifying ADAS calibration services are backed by our in-house warranty plus a 2-year nationwide warranty through ProVantage.
Clear Communication From Start to Finish
We explain which systems were affected, what calibration was performed, and what to watch for so you leave fully informed.
Proud Members of the Wichita Community
Active in MWACA and the Wichita Regional Chamber of Commerce, and supporters of local charities across Sedgwick County.
Financing Available
Synchrony Car Care Card, Easy Pay Finance, Meritrust Credit Union, and Snap Finance are available when ADAS repairs and calibration are part of a larger service.
Frequently Asked QuestionsAbout ADAS Calibration
Do I really need ADAS calibration after a windshield replacement?
Yes. Forward-facing cameras mounted to the windshield are factory-calibrated to precise angles. When the windshield is replaced, that calibration is lost and must be restored before the system functions correctly.
How do I know if my ADAS needs recalibration?
A warning light for any driver assistance system is the most obvious sign. However, some calibration issues do not trigger a warning light immediately. If your vehicle has had suspension work, an alignment, a windshield replaced, or any repair involving a sensor or camera, an ADAS check is recommended.
Can any shop perform ADAS calibration?
ADAS calibration requires specific equipment, software, and space requirements that not all shops have. It also requires following manufacturer-specific procedures, which vary significantly between makes and models.
What happens if ADAS calibration is skipped after a repair?
The system may appear to function normally but operate outside its designed tolerances, meaning it could react incorrectly in a situation where you are depending on it. Skipping calibration after a qualifying repair is a safety risk.
Schedule Your ADAS Calibrationin Wichita, KS, Today
Whether your ADAS warning light is on, you recently had a windshield replaced, or your vehicle is coming out of suspension or alignment work, Affinity Automotive Services is ready to restore your safety systems to factory specifications.
Visit Us:Â 2606 W Pawnee St, Wichita, KS 67213
Call Us:Â (316) 425-8684
Car problems? We can solve them!
